型号	额定电压（V）	额定频率Hz	额定吸力（N）	额定行程(mm)	全行程(mm)	承受静态油压(MPa)	起动伏安 VA	吸特伏安VA	操作频率(T/h)
MFJ9-26YC	110/220 220/240	50/60	≥26	3	≥6	16	≤188	≤60	12000
	100 200	60
MFJ9-50YC	110/220 220/240	50/60	≥50	4	≥8	16	≤336	≤84	12000
	100 200	60

The order code

阀用电磁铁	交流	设计序号	额定吸力(Kgf)	湿式
MF	J	9	26/50	YC

Stroke - force characteristic curve

Appearance and installation dimensions

Using the matters needing attention
Electromagnet used ISO4400 standard socket. A with light and without light two specifications, you can choose according to need. With a lamp socket voltage specifications must be consistent with electromagnet ontology voltage specifications.
Electromagnet push rod is used to manually in debugging or in an emergency, manual control. But when the system back pressure is higher, adjustment difficulties, please use the phillips screwdriver slowly push manual push rod, unfavorable use impact, so as not to damage the manual push rod and guide inner hole surface, electromagnet leak or position.
When two-way use electromagnet, must ensure that no two electromagnets electricity at the same time, in order to avoid the electromagnetic valve can't work normally.
Electric control system and the electromagnet connection between parts should have over-current protection device, in order to avoid abnormal cases, burning electromagnet and your electronic components.

Samples show
If customers have different needs, on the basis of the electromagnetic properties, the electromagnet and the valve size of connection, the valve stem into length and the working power supply voltage can be adjusted according to the requirements.
Characteristic curves are for reference only.
Main characteristic parameters are the laboratory conditions, the company reserve the right to modify the parameters.