3245澳门新莆京(中国)有限公司-BinG百科

中文/ English +86-577-61761217


MFB12 -yc series communication this integer wet-type electromagnet for valve

MFB12 -yc series communication this integer wet-type electromagnet for valve
use
This series of electromagnet applies to dc 50 h, the control circuit of the voltage to 220 v. As the power of hydraulic solenoid directional valve components. Can form a complete set of Japanese type oil research (YUKEN) 6, 10 diameter wiring box thread coupling electromagnetic directional valve.

Normal working conditions
Can be installed in any direction.
Use environment should have no enough to corrosive action on metals, and damage the insulation gas and dust. Otherwise, that may affect product life.
Electromagnet for duty, duty cycle for a long time.
Reasonable power supply voltage fluctuation range of 85% to 85% (special request when ordering) is put forward.
Enclosure protection grade reaches IP65.

The main technical parameters

型号
额定电压（V）
额定吸力（N）
额定行程(mm)
全行程(mm)
消耗功率(W)
承受静态油压(MPa)
操作频率(T/h)
MFB12-22YC
110 220
≥22
2.8
≥6
≤30
21
12000
MFB12-25YC
110 220
≥25
2.8
≥6.1
≤26
21
12000
MFB12-37YC
110 220
≥37
2.8
≥6.1
≤30
21
12000
MFB12-60YC
110 220
≥60
4
≥9
≤30
21
12000
MFB12-90YC
110 220
≥90
4
≥9
≤36
21
12000

The order code
阀用电磁铁
交流本整
设计序号
额定吸力(Kgf)
湿式
MF
B
12
22/25/37/60/90
YC

Stroke - force characteristic curve

Appearance and installation dimensions



Using the matters needing attention
Electromagnet used ISO4400 standard socket. A with light and without light two specifications, you can choose according to need. With a lamp socket voltage specifications must be consistent with electromagnet ontology voltage specifications.
Electromagnet push rod is used to manually in debugging or in an emergency, manual control. But when the system back pressure is higher, adjustment difficulties, please use the phillips screwdriver slowly push manual push rod, unfavorable use impact, so as not to damage the manual push rod and guide inner hole surface, electromagnet leak or position.
When two-way use electromagnet, must ensure that no two electromagnets electricity at the same time, in order to avoid the electromagnetic valve can't work normally.
Electric control system and the electromagnet connection between parts should have over-current protection device, in order to avoid abnormal cases, burning electromagnet and your electronic components.

Samples show
If customers have different needs, on the basis of the electromagnetic properties, the electromagnet and the valve size of connection, the valve stem into length and the working power supply voltage can be adjusted according to the requirements.
Characteristic curves are for reference only.
Main characteristic parameters are the laboratory conditions, the company reserve the right to modify the parameters.

Framework of electromagnet

Sucker electromagnet

Pipe electromagnet

Keep electromagnet

CONTACT

Hotline：+86-577-61761217

FAX：+86-577-61767217

ZIP CODE：325604

URL：www.cn-zye.com

E-mail：info@cn-zye.com

Copyright ©2018~2024              Yueqing ZhengYong co., LTD.             浙ICP备11024793号-1